Cart is empty
2006 2007 2008 2009 2010 Chrysler PT Cruiser New Replacement Remote Key Fob
FCC ID: OHT692427AA
Compatible # 05175789AA 56040649ac 56040649 05175786AA 05175817AA
This is a brand new uncut replacement keyless entry remote key for 2006-2010 Chrysler PT Cruiser. This Chrysler PT Cruiser key is 100% complete. This keyless remote will need to be cut and programmed before it can start your engine. Please make sure that your original remote has the same buttons on it.
Programming: You must have 2 working original Chrysler PT Cruiser remote keys in order to program this remote yourself. If you only have 1 original Chrysler PT Cruiser Remote key then you will need to get this key cut and programmed by an automotive locksmith or dealership.
Fits: 2006 2007 2008 2009 2010 Chrysler PT Cruiser
Have all keys for the vehicle ready.
You must have two working programmed keys to use this procedure
1. Insert first programmed key into the ignition and turn ignition switch to ON. Wait for approximately 3 seconds then turn ignition to OFF and remove key.
2. Within 15 seconds of removing first key insert second programmed key into ignition and turn ignition switch to ON. Wait approximately 10 seconds. You will see the immobilizer warning lamp illuminate on the dash and you will hear an audible tone. Turn ignition OFF and remove the key.
3. Within 50 seconds insert the new unprogrammed key into ignition. Turn ignition switch to ON. After approximately 10 seconds you should hear an audible tone and the immobilizer lamp will remain illuminated for 3 seconds. Once this occurs programming is completed.
4. For each additional key you must repeat these steps starting with step number 1.
No posts found